Key attributes

• 2.00mm pitch wire harness housing , with PBT material for the housing and internal locking method for fixation.  The measured strength of the locking mechanism can reach over 100N;

• The terminal adopts a lateral insertion type with insertion error prevention design; The electrical contact of the terminal is stable, and the electrical vibration resistance can reach V2 level;

• The terminal and housing are locked with a secondary lock, and the terminal holding force can reach more than 50N, making the electrical connection safer;

• The lock bar is pre installed, making it easy and fast to use.

  
  

  
  

• The board end uses PA9T high-temperature material and adopts SMT welding technology. The board end and wire end have anti needle insertion design, which can effectively prevent insulation terminal from being mistakenly inserted.

  
  

Applicable standards: USCAR2.0, QC/T1067-2017 and other vehicle specification standards

Rated current: 3.0A AC DC (can accept customized high current of 7A)

Rated voltage: 50V DC

Insulation resistance: ≥ 100 Μ Ω

Contact resistance: ≤ 25m Ω

Voltage endurance: 1000V AC/minute

Anti vibration level: V2 level

Temperature range: -40 ℃ to+125 ℃

Typical application scenarios: car lights, in car entertainment devices, etc

• 

  B2001 SAN board to board connector 2.0mm Pitch Beige 2pin to 16 pin wire harness

• 

  B2501 SCN board to board 2.5mm Pitch Beige 2pin to 16 pin wire harness SCN connector

• 

  A0601 Wire to board connector 0.6mm Pitch 2PIN to 16PIN Terminal housing connector

• 

  A0801 Wire to board connector 0.8mm Pitch I.D.C STYLE 2Pin to 25 pin SUR connector

• 

  Smart Home

• 

  LED Lighting

• 

  Automotive

• 

  Consumer Electronics